This pressure-based tank level sensor provides accurate, real-time measurement of fluid levels by detecting hydrostatic pressure within the tank. Designed for compatibility with the AquaCast module, it delivers a stable analogue signal suitable for precise monitoring and calibration.
Key capabilities
- Continuous level measurement (not discrete steps)
- Stable analogue output signal
- Designed for water and grey water tanks
- Compatible with AquaCast sensor inputs
Electrical interface
- 3-wire connection:
- Red – 12V supply
- Blue – signal output
- Yellow – ground
- Optimised for stable signal input systems
Performance
- Smooth and consistent readings
- Resistant to noise and fluctuation
- Suitable for mobile environments (caravans, campervans)
Installation
- Installed at the base or lower section of the tank
- Connects directly to AquaCast via screw terminals
- Calibration performed through the AquaViser display (empty/full scaling)
- supporting tanks up to 50cm tall
This sensor enables accurate tank monitoring without moving parts, making it a reliable solution for real-time water level measurement in mobile and off-grid systems.
Technical Specifications
| Model Name | AquaViser™ Level Sensor |
|---|---|
| Thread fitting | 1/4” BSP |
| Liquid measuring types | Large range including: Water, waste water, petrol, diesel and oils |
| Operating Voltage | 12 VDC nominal (range: 11 – 14.5 VDC) |
| Maximum Water (Tank) Height | 50 cm (500mm) |
| Measurement | Hydrostatic Pressure (50cm max) |
| Power Consumption | 0.09 W max |
| Ingress protection | IP65 (dust-tight, protected against water jets). |
| Cable Length | 2 meters - 3 wire + shield (can be extended) |
| Material – Sense Diaphragm | Stainless Steel 316 L |
| Material – Body | 304 Stainless Steel |
| Wiring – Red | Power 12 V+ |
| Wiring – Yellow | Power GND |
| Wiring – Blue | Signal Out (0.5-11 V) |
Reviews
There are no reviews yet.